Why should the laser cutting machine add antifreeze when the cold wave strikes? If don't add antifreeze? The following small series to popular science: laser cutting machine does not add antifreeze will produce what hazards and consequences.
Na primjer:
1. Pumpa za hladnu vodu.
2. Metalna glava je smrznuta i napukla.
3. Rezna glava je smrznuta i napukla.
4. Izlazna glava optičkog vlakna je smrznuta i napukla.
5. Unutrašnji vodeni put lasera je zamrznut i napukao.
Zašto lasersko zamrzavanje?
Anti freezing measures for laser are the most important in the maintenance of laser cutting equipment in winter. When the temperature is lower than 0 degree , the liquid water condenses into solid, and the volume of ice will be larger than that of water, which will "crack" the pipelines, joints and components in the laser water cooling system. Including water cooler, cutting head, etc.
Ako se ne kontrolira, teška hladna klima će uzrokovati nepopravljivu štetu na opremi. Posebno za zadnja dva dijela, trošak održavanja je 20000-50000 na početku, a najvažniji se direktno rashoduje, koji nema vrijednost održavanja.
Every winter, major manufacturers will receive a lot of lasers and cutting heads repaired due to freezing. The biggest headache is that the damage caused by freezing crack is not within the scope of the manufacturer's service warranty.
Therefore, in order to avoid unnecessary losses and troubles, remind all "good machine friends" to add antifreeze according to the manufacturer's requirements and take protective measures.
